200 Amp 110-Volt/220-Volt AC Dual Voltage Input DC MIG/TIG/Stick Multi-Process Welder

If you are looking for an all around performer PowerMTS 211Si has more than enough capability to handle most chores. As 1 of the multi-process welders of Everlast MTS MIG/TIG/Stick line this unit has been upgraded with the user in mind. It has all previous generations features and also adds synergic capability to the MIG component which offers quick setup of the welder based on wire diameter and metal type. Manual override is also available so the user can fine tune the settings. Finally there is a standard MIG mode where setup is fully controlled by the operator. The welder is also equipped with a spool gun mode too. Compared to other models on the market it is very easy to operate and connect. Foot pedal and TIG torch are also included and connect directly to the front to weld TIG. TIG torch does not need a manual gas valve because gas flow is controlled automatically. TIG mode includes High Frequency start. In the compact Multi-process market Everlast has designed and introduced a touchless TIG start for maximum weld quality. Of course Lift start is still there if you are working in a place that is electronically sensitive to High Frequency. Stick mode operation is also improved with addition of Hot Start duration and Hot start intensity adjustments. Combined with the Arc force control this makes the 175 amp Stick mode very capable of handling up to 1/8 in. welding rods. Using 6010 rod is not recommended but welder handles 6011 just fine.

Comes with 15-series MIG gun 26-series TIG air-cooled torch and TIG foot pedal
All digital DC CC/CV multi-process inverter design offers the perfect welder for nearly every task
Light weight design makes the unit extremely portable ideal for jobsites and motorsports
8 in. Dia wire spool capacity provides a good compromise for long duration welding and portability
Synergic MIG operation or standard MIG operation
Easy to use operator friendly panel to select features
Adjustable MIG wave form control manages slope/inductance and fine tunes arc characteristics
Adjustable arc force control allows the user to dial in desired stick welding performance
Adjustable TIG up/downslope allows the user to control the end of the welding cycle
Adjustable burn back control keeps wire energized after feeding stops to burn back the wire to a perfect length without needing to trim wire for restarts
Spool gun capable for MIG spool gun purchased separately
Exclusive 9-channel memory function allows favorite settings to be stored for quick setup
High frequency start and lift start modes for TIG
2T/4T torch trigger/latch function offers stepped control welding with TIG and MIG
Adjustable pre and post flow for TIG and MIG operation improves over all weld quality by reducing porosity during start/stops